A self leveling compound can be applied to most types of subfloor materials. Put down a layer of cement then screw on the cement board.
I would like to feather out the bad areas with a leveling compound before i lay my felt paper.
Self leveling floor compound for wood. Once you’ve applied the primer over the floor, you’ll need to wait for it to dry. This akona floor leveling compound is available at mennards for about $35 per 50lb bag. If height is an issue take up the chipboard,level the joists overlay with suitable thickness wbp plywood and then secret nail or float.
The surfaces, absorbencies, and strengths of uzin levelling compounds are specially adapted. Don’t forget to prime your substrate prior to application. Why not lay a layer of something like durarock over the self leveling and start anew?
Sets up fast, install flooring in as little as 6 hours for ceramic tile and 16 hours for all other floor covering More or less water can influence the products performance. You can use a levelling compound but be sure to choose the right one for instance ardex na and have you considered taking up the rubbish chipboard and secret nailing your new floor direct to the joists.
(1.36 kg) per square foot at 1/2 (13 mm) thickness, it is 3 lbs. If you need to level off an uneven area of concrete ready for putting down some new flooring, then this easy to use floor leveller will self level up to 1 inch per application. Levelling compound can be used on a variety of subtrates including concrete, screed, existing tiles and timber floors.
We would suggest using a spike roller to help level the floor and remove any air pockets. This is the exact sort of thing that you should use self leveling compound for. Your leveling doesn't have to be perfect but i would fix the dip.
You can also use self leveling compounds when installing tile over top of. Uneven substrates like screed, concrete, and the like can be overhauled with uzin’s levelling compound, thus helping to avoid hollow spots under wood flooring. Cures to provide a smooth consistent surface to receive a variety of floor covering materials.
A self leveling compound is a concrete type floor underlayment that is applied to subflooring prior to the installation of tile or wood. This is very very easy. (1.36 kg) lighter than traditional underlayment and excellent for.
Prior to levelling ensure the first layer is dry, contamination free and primer with mapei primer g. Smoothing interior floors over properly prepped concrete (old or new), wood, terrazzo, ceramic tile, and adhesive residues on concrete. Using a suitable container to mix the leveller in, slowly add the powder to approximately 4.5 quarts of clean water.
Uzin has a special wood flooring levelling compound in their product range for these requirements. Billbrennen | posted in construction techniques on july 13, 2007 03:18am. Ready for other types of floor coverings in 2 to 3 days.
A self leveling compound is a concrete type floor underlayment that is applied to subflooring prior to the installation of tile or wood. Easy to use, just mix, pour, and spread; Mix the floor leveling compound in a bucket with an electric drill and mixing attachment.
Their home was framed very poorly, with a subfloor that resembles waves. Smoothes and flattens interior floors. Self levelling compound is used in the preparation of laying most floor coverings to create a smooth and level surface.
Using a self leveling compound is easier than other types of subfloor compounds because it will fill in low spots to make sure that a more complete coverage of the floor takes place. Ready for ceramic tile or stone in as little as 24 hours. Rutland floor level is a floor leveling compound in a premixed tub.
I used the self leveling when i had to redo the floor in my mothers apt in a 60 year old building and it made more work then it was worth. So about 600£ if i want plywood + self levelling compound, just over 200£ if i have the slc screed directly on floorboards (including sealing all the gaps beforehand) the person i found to do the job says he would just screed over the floorboards, but it’s my call eventually. You can apply self leveling compound to plywood, osb, concrete, cement board, hardibacker and many other types of subfloor materials.
Using a self leveling compound is easier than other types of subfloor compounds because it will fill in low spots to make sure that a more complete coverage of the floor takes place. I found that the boards work great.