To make this angle work an additional layer of 3 8 thick plywood underlayment must be installed glued and screwed down over the plank subfloor. Vinyl material that s in place as well as tile.
If you have very high or low.
Hardwood floor subfloor planks. Floating engineered wood floors can simply be installed directly on osb subfloor the hardwood flooring must be installed crossing the floor joists at a 90 degree angle. Vesdura vinyl planks 6 5mm spc click lock xl jumbo collection in brown sawn french oak sku. Plywood to establish a flat surface and separate the two hardwood surfaces to avoid the expansion and contraction differences between the two hardwoods.
15270039 some people choose to install luxury vinyl flooring over an existing floor to save both time and money. The easiest way to install hardwood is a floating floor. It s the foundation that provides a solid place for your hardwood to sit for years to come.
Right now i have 3 4 tg hardwood which is not in the best shape over a 2 5 wide x 3 4 inch think plank subfloor which runs perpendicular to the joists 2×10 16 oc. Hardwood flooring must be installed at 90 degree angle across the subfloor planks to stabilize the whole floor structure. When installing laminate vinyl tile or hardwood flooring it s important to know how to level a floor.
The subfloor is what lies beneath the planks of solid or engineered hardwood flooring. Leveling floors can be a diy project or left to professionals. Installing floors is a difficult diy job.
Because so much is resting on the strength of your subfloor it is critical that you ensure all the subfloor requirements are met before you install. Ideally i would tear out the existing finish flooring screw down the existing plank subfloor where loose repair the plank subfloor where needed and then lay my new flooring engineered hardwood right over the existing. A level subfloor will help your flooring last longer and keep the finish attractive.
If there is any deflection in the subfloor when walked on it would be advisable to add an additional layer of 3 8 or 1 2 thick plywood underlayment glued and screwed down over the osb subfloor to add stability. If the current subfloor has tongue and groove hardwood planks check to see if it is attached directly to the joists or if it s on top of another subfloor. If it is attached to the joists you can use the 1 4 in.
Underlayments can combine water barrier protection and noise reduction. A floating hardwood floor underlayment acts as a slight cushion that reduces noise and provides some insulation.