Can You Pour Epoxy Over Concrete

Can You Pour Epoxy Over Concrete. Terrazzo is a good investment for building owners looking for a flooring system that is built to last. If the pressure washing damages the concrete matrix, you should tear out the.

Can You Pour Epoxy Over Concrete
Cement Floor Achor Epoxy Epoxy Floor from

Pouring concrete over old concrete instead of directly over a new gravel foundation limits your ability to maximize the slab's lifespan. Frustration that usually is tied to money wasted. While you can pour epoxy over a surface that is uneven if you pour thin surface coating it will simply follow the gradient of the existing surface.

Click To See Full Answer.

Plus, it extends the life of the original concrete. If you sand and follow the. Once it's tack free (up to 12 hours) it can be coated over with other epoxies.

If You Think That The Concrete Substrate Looks Uneven, Just Wait Till You Coat Over With Epoxy.

Yes, you can pour epoxy over concrete. The condition of the existing slab is the primary factor that determines how long the new concrete will last. A normal concrete mix must cure for at least 28 days before coating.

Smooth It Out Best You Can With A Putty Knife Or Margin Trowel.

When using epoxy, it can be a helpful process to add a second layer, but you want to make sure to follow the correct procedures. Resurfacing existing concrete can add new life, finish, and even color to worn, chipped and cracked surfaces. They can be applied over existing or new surfaces, particularly concrete.

There Are Two Approaches To This Process.

But i've been flirting with the idea of epoxy. This being said, you can pour epoxy over an uneven surface to level it out, pouring enough epoxy to compensate for the gradient and allowing it to cure hard. Epoxy is glossy and this will lead to all dents, cracks, holes and trowel marks of.

Yes There Are Certain Kinds Of Epoxies That Can Be Applied Over Some Sealed Floors.

In august 2020, ryan s., a reader, left this comment below, “you can 100% use the container you mixed your epoxy in over again, i usually use a smaller bucket than the one pictured. To check the condition of the matrix, pressure wash a small portion of the deck at about 3500 psi. These come both in kits and individual gallons.

Leave a Reply